GSA Numbers and Codes
GS-35F-0346J,
expires Mar 30, 2014
23-2984562
07 336 6119
1LW45
Yes
GSA Terms and Conditions
- GSA Schedule Number: GS-35F-0346J
- Period Covered by Contract: 4/1/1999-3/30/2014
- Significant Difference From Preceding GSA Schedule
- Information for Ordering Offices
- Terms and Conditions 132-34
- Search GSA price list
Term of contract is five (5) years. Prices are guaranteed only for the first year of the contract.
Information For Ordering Offices
Special Notice to Agencies
Small Business Participation
SBA strongly supports the participation of small business concerns in the Federal Supply Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.
For orders exceeding the micropurchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service. The catalogs/pricelists, GSA Advantage! and the Federal Supply Service Home Page contain information on a broad array of products and services offered by small business concerns.
This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.
For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.
1. The Geographic scope of this contract is the forty-eight contiguous states and the District of Columbia
2. Contractor's Ordering Address and Payment Information:
Ordering Address:
Softmart Government Services Inc.
450 Acorn Lane
Downingtown, PA 19335
Payment Address:
Softmart Government Services Inc.
P.O. Box 8500-52288
Philadelphia, PA 19178-2288
Contractors are required to accept the Government purchase card for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Government purchase cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice.
The following telephone number(s) can be used by ordering agencies to obtain technical and/or ordering assistance: 800-628-9091
3. LIABILITY FOR INJURY OR DAMAGE
The Contractor shall not be liable for any injury to Government personnel or damage to Government property arising from the use of equipment maintained by the Contractor, unless such injury or damage is due to the fault or negligence of the Contractor.
4. Statistical Data for Government Ordering Office Completion of Standard Form 279:
Block 9: G. Order/Modification Under Federal Schedule
Block 16: Data Universal Numbering System (DUNS) Number: 07 336 6119
Block 30: Type of Contractor - Small Business
Block 31: Woman-Owned Small Business - No
Block 36: Contractor's Taxpayer Identification Number (TIN) 23-2984562
4a. CAGE Code: 1LW45
5. FOB Destination
6. DELIVERY SCHEDULE
a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as set forth below:
| SPECIAL ITEM NUMBER | DELIVERY TIME (DAYS ARO) |
| 132-33 | 30 days ARO |
| 132-34 | 30 days ARO |
b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering agency, agencies are encouraged, if time permits, to contact the Contractor for the purpose of obtaining accelerated delivery. The Contractor shall replay to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by the Contractor in writing.) If the Contractor offers an accelerated delivery time acceptable to the ordering agency, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.
7. Discounts: Prices shown are NET Prices; Basic Discounts have been deducted.
a. Prompt Payment: 0% - 0 days from receipt of invoice or date of acceptance, whichever is later
b. Quantity discounts are listed herein
c. Dollar Volume - None
d. Government Educational Institutions are offered the same discounts as all other Government customers
e. Other - None
8. Trade Agreements Act of 1979, as amended:
All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.
9. Export packing is available outside the scope of this contract.
10. Small Requirements: The minimum dollar value of orders to be issued is $100.00.
11. Maximum Order: (All dollar amounts are exclusive of any discount for prompt payment.)
a. Special Item Number 132-33 - Perpetual Software Licenses
The maximum dollar value per order for all perpetual software licenses will be $50,000 or $500,000.
12. USE OF FEDERAL SUPPLY SERVICE INFORMATION TECHNOLOGY SCHEDULE CONTRACTS. In accordance with FAR 8.404:
Orders placed pursuant to a Multiple Award Schedule (MAS), using the procedures in FAR 8.404, are considered to be issued pursuant to full and open competition. Therefore, when placing orders under Federal Supply Schedules, ordering offices need not seek further competition, synopsize the requirement, make a separate determination of fair and reasonable pricing, or consider small business set-asides in accordance with subpart 19.5. GSA has already determined the prices of items under schedule contracts to be fair and reasonable. By placing an order against a schedule using the procedures outlined below, the ordering office has concluded that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the Government's needs.
a. Orders placed at or below the micro-purchase threshold.
Ordering offices can place orders at or below the micro-purchase threshold with any Federal Supply Schedule Contractor.
b. Orders exceeding the micro-purchase threshold but not exceeding the maximum order threshold.
Orders should be placed with the Schedule Contractor that can provide the supply or service that represents the best value. Before placing an order, ordering offices should consider reasonably available information about the supply or service offered under MAS contracts by using the "GSA Advantage!" on-line shopping service, or by reviewing the catalogs/pricelists of at least three Schedule Contractors and selecting the delivery and other options available under the schedule that meets the agency's needs. In selecting the supply or service representing the best value, the ordering office may consider—
(1) Special features of the supply or service that are required in effective program performance and that are not provided by a comparable supply or service;
(2) Trade-in considerations;
(3) Probable life of the item selected as compared with that of a comparable item;
(4) Warranty considerations;
(5) Maintenance availability;
(6) Past performance; and
(7) Environmental and energy efficiency considerations.
c. Orders exceeding the maximum order threshold.
Each schedule contract has an established maximum order threshold. This threshold represents the point where it is advantageous for the ordering office to seek a price reduction. In addition to following the procedures in paragraph b, above, and before placing an order that exceeds the maximum order threshold, ordering offices shall—
(1) Review additional Schedule Contractors' catalogs/pricelists or use the "GSA Advantage!" on-line shopping service;
(2) Based upon the initial evaluation, generally seek price reductions from the Schedule Contractor(s) appearing to provide the best value (considering price and other factors); and
(3) After price reductions have been sought, place the order with the Schedule Contractor that provides the best value and results in the lowest overall cost alternative. If further price reductions are not offered, an order may still be placed, if the ordering office determines that it is appropriate.
NOTE: For orders exceeding the maximum order threshold, the Contractor may—
(1) Offer a new lower price for this requirement (the Price Reductions clause is not applicable to orders placed over the maximum order in FAR 52.216-19 Order Limitations);
(2) Offer the lowest price available under the contract; or
(3) Decline the order (orders must be returned in accordance with FAR 52.216-19).
d. Blanket purchase agreements (BPAs).
The establishment of Federal Supply Schedule BPAs is permitted when following the ordering procedures in FAR 8.404. All schedule contracts contain BPA provisions. Ordering offices may use BPAs to establish accounts with Contractors to fill recurring requirements. BPAs should address the frequency of ordering and invoicing, discounts, and delivery locations and times.
e. Price reductions.
In addition to the circumstances outlined in paragraph c, above, there may be instances when ordering offices will find it advantageous to request a price reduction. For example, when the ordering office finds a schedule supply or service elsewhere at a lower price or when a BPA is being established to fill recurring requirements, requesting a price reduction could be advantageous. The potential volume of orders under these agreements, regardless of the size of the individual order, may offer the ordering office the opportunity to secure greater discounts. Schedule Contractors are not required to pass on to all schedule users a price reduction extended only to an individual agency for a specific order.
f. Small business.
For orders exceeding the micro-purchase threshold, ordering offices should give preference to the items of small business concerns when two or more items at the same delivered price will satisfy the requirement.
g. Documentation.
Orders should be documented, at a minimum, by identifying the Contractor the item was purchased from, the item purchased, and the amount paid. If an agency requirement in excess of the micro-purchase threshold is defined so as to require a particular brand name, product, or feature of a product peculiar to one manufacturer, thereby precluding consideration of a product manufactured by another company, the ordering office shall include an explanation in the file as to why the particular brand name, product, or feature is essential to satisfy the agency's needs.
13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS REQUIREMENTS:
Federal departments and agencies acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering offices, shall be responded to promptly by the Contractor.
13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):
Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.
13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS):
Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Supply Service, Specification Section, 470 East L'Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.
14. SECURITY REQUIREMENTS.
In the event security requirements are necessary, the ordering activities may incorporate, in their delivery orders, a security clause in accordance with current laws, regulations, and individual agency policy; however, the burden of administering the security requirements shall be with the ordering agency. If any costs are incurred as a result of the inclusion of security requirements, such costs will not exceed ten percent (10%) or $100,000, of the total dollar value of the order, whichever is lessor.
15. CONTRACT ADMINISTRATION FOR ORDERING OFFICES:
Any ordering office, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the Government's convenience, and (m) Termination for Cause (See C.1.)
16. GSA Advantage!
GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:
(1) Manufacturer;
(2) Manufacturer's Part Number; and
(3) Product categories.
Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.fss.gsa.gov/.
17. PURCHASE OF INCIDENTAL, NON-SCHEDULE ITEMS
For administrative convenience, open market (non-contract) items may be added to a Federal Supply Schedule Blanket Purchase agreement (BPA) or an individual order, provided that the items are clearly labeled as such on the order, all applicable regulations have been followed, and price reasonableness has been determined by the ordering activity for the open market (non-contract) items.
18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS
a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:
(1) Time of delivery/installation quotations for individual orders.
(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.
(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.
b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.
19. OVERSEAS ACTIVITIES
The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:
Our terms and conditions apply only to the forty-eight contiguous states and the District of Columbia.
Upon request of the Contractor, the Government may provide the Contractor with logistics support, as available, in accordance with all applicable Government regulations. Such Government support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.
20. YEAR 2000 WARRANTY - COMMERCIAL SUPPLY ITEMS
"Year 2000 compliant" means information technology that accurately processes date/time data (including, but not limited to, calculating, comparing, and sequencing) from, into, and between the twentieth and twenty-first centuries, and the years 1999 and 2000 and leap year calculations. Furthermore, Year 2000 compliant information technology, when used in combination with other information technology, shall accurately process date/time data if the other information technology properly exchanges date/time data with it.
The Contractor warrants that each hardware, software, and firmware product delivered under this contract shall be able to accurately process date data (including, but not limited to, calculating, comparing, and sequencing) from, into, and between the twentieth and twenty-first centuries, including leap year calculations, when used in accordance with the product documentation provided by the Contractor, provided that all listed or unlisted products (e.g. hardware, software, firmware) used in combination with such listed product properly exchange date data with it. If the contract requires that specific listed products must perform as a system in accordance with the foregoing warranty, then that warranty shall apply to those listed products as a system. The duration of this warranty and the remedies available to the Government for breach of this warranty shall be as defined in, and subject to, the terms and limitations of the Contractor's standard commercial warranty or warranties contained in this contract, provided that notwithstanding any provision to the contrary in such commercial warranty or warranties, the remedies available to the Government under this warranty shall include repair or replacement of any listed product whose non-compliance is discovered and made known to the Contractor in writing within ninety (90) days after acceptance. Nothing in this warranty shall be construed to limit any rights or remedies the Government may otherwise have under this contract with respect to defects other than Year 2000 performance.
21. BLANKET PURCHASE AGREEMENTS (BPAs)
Federal Acquisition Regulation (FAR) 13.201(a) defines Blanket Purchase Agreements (BPAs) as "...a simplified method of filling anticipated repetitive needs for supplies or services by establishing 'charge accounts' with qualified sources of supply." The use of Blanket Purchase Agreements under the Federal Supply Schedule Program is authorized in accordance with FAR 13.202(c)(3), which reads, in part, as follows:
"BPAs may be established with Federal Supply Schedule Contractors, if not inconsistent with the terms of the applicable schedule contract."
Federal Supply Schedule contracts contain BPA provisions to enable schedule users to maximize their administrative and purchasing savings. This feature permits schedule users to set up "accounts" with Schedule Contractors to fill recurring requirements. These accounts establish a period for the BPA and generally address issues such as the frequency of ordering and invoicing, authorized callers, discounts, delivery locations and times. Agencies may qualify for the best quantity/volume discounts available under the contract, based on the potential volume of business that may be generated through such an agreement, regardless of the size of the individual orders. In addition, agencies may be able to secure a discount higher than that available in the contract based on the aggregate volume of business possible under a BPA. Finally, Contractors may be open to a progressive type of discounting where the discount would increase once the sales accumulated under the BPA reach certain prescribed levels. Use of a BPA may be particularly useful with the new Maximum Order feature. See the Suggested Format, contained in this Schedule Pricelist, for customers to consider when using this purchasing tool.
22. CONTRACTOR TEAM ARRANGEMENTS
Federal Supply Schedule Contractors may use "Contractor Team Arrangements" (see FAR 9.6) to provide solutions when responding to a customer agency requirements. The policy and procedures outlined in this part will provide more flexibility and allow innovative acquisition methods when using the Federal Supply Schedules. See the additional information regarding Contractor Team Arrangements in this Schedule Pricelist.
1. INSPECTION/ACCEPTANCE
The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any software that has been tendered for acceptance. The Government may require repair or replacement of nonconforming software at no increase in contract price. The Government must exercise its post acceptance rights (1) within a reasonable time after the defect was discovered or should have been discovered; and (2) before any substantial change occurs in the condition of the software, unless the change is due to the defect in the software.
2. GUARANTEE/WARRANTY
a. Unless specified otherwise in this contract, the Contractor's standard commercial guarantee/warranty as stated in the contract's commercial pricelist will apply to this contract. Softmart Government Services Inc. is not the manufacturer of the products included in this offer. Therefore, we supply no commercial warranty.
b. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this document.
c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.
3. TECHNICAL SERVICES
The Contractor, without additional charge to the Government, shall provide a hot line technical support number (610) 518-4252 for the purpose of providing user assistance and guidance in the implementation of the software. The technical support number is available from 8:00AM EST to 8:00PM EST.
4. SOFTWARE MAINTENANCE
a. Software maintenance service shall include the following: Softmart Government Services Inc. recognizes software maintenance as a subscription plan where the subscriber is entitled to upgrade his/her license to the most current version of that software product. The payment for software maintenance is due up front.
b. Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE b. Invoices for maintenance service shall be submitted by the Contractor on a quarterly or monthly basis, after the completion of such period. Maintenance charges must be paid in arrears (31 U.S.C. 3324). PROMPT PAYMENT DISCOUNT, IF APPLICABLE, SHALL BE SHOWN ON THE INVOICE.
5. PERIODS OF MAINTENANCE (132-34)
a. The Contractor shall honor orders for periods for the duration of the contract period or a lessor period of time.
b. Annual Funding. When annually appropriated funds are cited on an order for maintenance, the period of the maintenance shall automatically expire on September 30 of the contract period, or at the end of the contract period, whichever occurs first. Renewal of the maintenance orders citing the new appropriation shall be required, if the maintenance is to be continued during any remainder of the contract period.
c. Cross-Year Funding Within Contract Period. Where an ordering office's specific appropriation authority provides for funds in excess of a 12 month (fiscal year) period, the ordering office may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.
d. Ordering offices should notify the Contractor in writing thirty (30) calendar days prior to the expiration of an order, if the maintenance is to be terminated at that time. Orders for the continuation of maintenance will be required if the maintenance is to be continued during the subsequent period.
6. MAINTENANCE CESSATION
a. The Contractor agrees to provide updates and maintenance service for the software after a perpetual license has accrued, at the prices and terms of Special Item Number l32-34, if the licensee elects to order such services. Title to the software shall remain with the Contractor.
7. UTILIZATION LIMITATIONS - (132-33, AND 132-34)
a. Software acquisition is limited to commercial computer software defined to be: COMMERCIAL COMPUTER SOFTWARE - Computer software which is used regularly for other than Government purposes and is sold, licensed or leased in significant quantities to the general public at established catalog prices.
b. When acquired by the Government, commercial computer software and related documentation so legend shall be subject to the following:
(1) Title to and ownership of the software and documentation shall remain with the Contractor, unless otherwise specified.
(2) Software licenses are by site and by agency. An agency is defined as a cabinet level or independent agency. The software may be used by any subdivision of the agency (service, bureau, division, command, etc.) that has access to the site the software is placed at, even if the subdivision did not participate in the acquisition of the software. Further, the software may be used on a sharing basis where multiple agencies have joint projects that can be satisfied by the use of the software placed at one agency's site. This would allow other agencies access to one agency's database. For Government public domain databases, user agencies and third parties may use the computer program to enter, retrieve, analyze and present data. The user agency will take appropriate action by instruction, agreement, or otherwise, to protect the Contractor's proprietary property with any third parties that are permitted access to the computer programs and documentation in connection with the user agency's permitted use of the computer programs and documentation. For purposes of this section, all such permitted third parties shall be deemed agents of the user agency.
(3) Except as is provided in paragraph 8.b(2) above, the Government shall not provide or otherwise make available the software or documentation, or any portion thereof, in any form, to any third party without the prior written approval of the Contractor. Third parties do not include prime Contractors, subcontractors and agents of the government who have the Government's permission to use the licensed software and documentation at the facility, and who have agreed to use the licensed software and documentation only in accordance with these restrictions. This provision does not limit the right of the Government to use software, documentation, or information therein, which the Government may already have or obtains without restrictions.
(4) The Government shall have the right to use the computer software and documentation with the computer for which it is acquired at any other facility to which that computer may be transferred, or in cases of disaster recovery, the Government has the right to transfer the software to another site if the Government site for which it is acquired is deemed to be unsafe for Government personnel; to use the computer software and documentation with a backup computer when the primary computer is inoperative; to copy computer programs for safekeeping (archives) or backup purposes; to transfer a copy of the software to another site for purposes of benchmarking new hardware and/or software; and to modify the software and documentation or combine it with other software, provided that the unmodified portions shall remain subject to these restrictions.
(5) "Commercial Computer Software" may be marked with the Contractor's standard commercial restricted rights legend, but the schedule contract and schedule pricelist, including this clause, "Utilization Limitations" are the only governing terms and conditions, and shall take precedence and supersede any different or additional terms and conditions included in the standard commercial legend.
9. SOFTWARE CONVERSIONS - (132-33)
Under a perpetual license (132-33), the purchase price of the new software shall be reduced by the amount that was paid to purchase the earlier version.
10. DESCRIPTIONS AND EQUIPMENT COMPATIBILITY
The Contractor shall include, in the schedule pricelist, a complete description of each software product and a list of equipment on which the software can be used. Also, included shall be a brief, introductory explanation of the modules and documentation which are offered.
11. RIGHT-TO-COPY PRICING
The Contractor shall insert the discounted pricing for right-to-copy licenses.
Saving settings, please wait...